A common European approach to the regulatory testing of nanomaterials

Funder

Organizational Unit

Publications

Riscos laborais associados à manipulação de nanomateriais

Publication . Louro, Henriqueta

De um modo geral, os nanomateriais manufaturados (NM) são definidos como materiais fabricados deliberadamente e que contêm partículas com pelo menos uma dimensão externa na gama de tamanhos compreendida entre 1 e 100 nanómetros (Comissão Europeia, 2011). A sua pequena dimensão confere-lhes propriedades físicas, químicas e biológicas que podem diferir bastante das propriedades dos materiais com a mesma composição química mas utilizados numa escala não nanométrica. São as propriedades mecânicas, óticas, elétricas e magnéticas inerentes aos materiais na escala “nano” que os tornam vantajosos para as mais diversas aplicações industriais e biomédicas. Contudo, a enorme expansão que tem vindo a acontecer ao nível da síntese, produção industrial e utilização de NMs contrasta com uma ainda insuficiente avaliação de risco para a saúde humana e para o ambiente. Efectivamente, A European Agency for Safety and Health at Work (EU-OSHA,2009) considerou a exposição a NM como o risco emergente mais premente no contexto da saúde ocupacional, estimando que entre 300.000 a 400.000 postos de trabalho lidavam já directamente com as nanotecnologias. Neste seminário será abordada a possibilidade de exposição ocupacional ao longo do ciclo de vida dos NM, bem como as suas potenciais implicações para a saúde dos trabalhadores. Nesta palestra são apresentados alguns estudos realizados no Instituto Nacional de Saúde Doutor Ricardo Jorge que produziram evidência científica que poderá contribuir para o esforço internacional da regulação da produção e aplicação de nanomateriais, salvaguardando a saúde humana face às suas aplicações inovadoras.

2016-05-31Lecture

Restricted access

Cyto- and Genotoxicity assessment of manufactured nano cerium dioxide in the A549 cell line

Publication . Saruga, Andreia; Louro, Henriqueta; Silva, Maria João

In the past decades the growing application of nanomaterials (NMs) in diverse consumer products has raised various concerns in the field of toxicology. They have been extensively used in a broad range of applications and cover most of the industrial sectors as well as the medicine and the environmental areas. The most common scenarios for human exposure to NMs are occupational, environmental and as consumers and inhalation is the most frequent route of exposure, especially in occupational settings. Cerium dioxide NMs (nano-CeO2) are widely used in a number of applications such as in cosmetics, outdoor paints, wood care products as well as fuel catalysts. For such reason, nano-CeO2 is one of the selected NMs for priority testing within the sponsorship program of the Working Party of Manufactured Nanomaterials of the OECD. In this context, the aim of this study is to assess the safety of nano-CeO2 (NM-212, Joint Research Center Repository) through the characterization of its cytotoxicity and genotoxicity in a human alveolar epithelial cell line. A dispersion of the NM in water plus 0.05% BSA was prepared and sonicated during 16 minutes, according to a standardized protocol. DLS analysis was used to characterize the quality of the NM dispersion in the culture medium. To evaluate the cytotoxicity of nano-CeO2 in the A549 cell line, the colorimetric MTT assay was performed; the capacity of cells to proliferate when exposed to CeO2 was also assessed with the Clonogenic assay. The genotoxicity of this NM was evaluated by the Comet Assay (3 and 24h of exposure) to quantify DNA breaks and the FPG-modified comet assay to assess oxidative DNA damage. The Cytokinesis-Block Micronucleus (CBMN) assay was used to further detect chromosome breaks or loss. The nano-CeO2 particles are spherical, displaying a diameter of 33 nm and 28 m2/g of surface area. The results of the MTT assay did not show any decreased in cells viability following treatment with a dose-range of nano-CeO2 during 24h. Nevertheless, the highest concentrations of this NM were able to significantly reduce the colony forming ability of A549 cells, suggesting that a prolonged exposure may be cytotoxic to these cells. Data from both genotoxicity assays revealed that nano-CeO2 was neither able to induce DNA breaks nor oxidative DNA damage. Likewise, no significant micronucleus induction was observed. Taken together, the present results indicate that this nano-CeO2 is not genotoxic in this alveolar cell line under the tested conditions, although further studies should be performed, e.g., gene mutation in somatic cells and in vivo chromosome damage (rodent micronucleus assay) to ensure its safety to human health.

2016-06-22Conference object

Restricted access

Manufactured Nanomaterials: is there a correlation between toxicological effects and the physicochemical properties?

Publication . Louro, Henriqueta; Tavares, Ana; Pinhão, Mariana; Santos, Joana; Vital, Nádia; Silva, Maria João

Toxicological information on nanomaterials (NMs) is of major importance for safety assessment, since they are already used in many consumer products and promise cutting-edge applications in the future. While the number of different NMs increases exponentially, new strategies for risk assessment are needed to cope with the safety issues, keeping pace with innovation. However, recent studies have suggested that even subtle differences in the physicochemical properties of NMs that are closely related may define different nano-bio interactions, thereby determining their toxic potential. Further research in this field is necessary to allow straightforward grouping strategies leading time-effective risk assessment to enable the safe use of the emerging NMs. In this presentation the case study of the in vitro toxicity testing of a set of multi-walled carbon nanotubes (MWCNTs) in two human cell lines from the respiratory tract will be described. Those MWCNT have been previously characterized in detail, and differ in thickness, length, aspect ratio and morphology. This comprehensive toxicological investigation undertaken in parallel with physicochemical characterization in the cellular moiety showed that the same NM did not display a consistent effect in different cell types, and that, within the same class of NM, different toxic effects could be observed. The correlation of the cytotoxic and genotoxic effects characterized in the two cell lines with their physicochemical properties will be presented and the relevance of considering the NMs properties in the biological context will be discussed. Overall, this case study suggests that nanotoxicity of closely related MWCNTs depends not only on their primary physicochemical properties, or combinations of these properties, but also on the cellular system, and its context. Challenges posed to toxicologists, risk assessors and regulators when addressing the safety assessment of NMs will be highlighted.

2016-06-22Lecture

Restricted access

Evaluation of the cytotoxic and genotoxic effects of benchmark multi-walled carbon nanotubes in relation to their physicochemical properties

Publication . Louro, Henriqueta; Pinhão, Mariana; Santos, Joana; Tavares, Ana; Vital, Nádia; Silva, Maria João

To contribute with scientific evidence to the grouping strategy for the safety assessment of multi-walled carbon nanotubes (MWCNTs), this work describes the investigation of the cytotoxic and genotoxic effects of four benchmark MWCNTs in relation to their physicochemical characteristics, using two types of human respiratory cells. The cytotoxic effects were analysed using the clonogenic assay and replication index determination. A 48h-exposure of cells revealed that NM-401 was the only cytotoxic MWCNT in both cell lines, but after 8-days exposure, the clonogenic assay in A549 cells showed cytotoxic effects for all the tested MWCNTs. Correlation analysis suggested an association between the MWCNTs size in cell culture medium and cytotoxicity. No induction of DNA damage was observed after any MWCNTs in any cell line by the comet assay, while the micronucleus assay revealed that both NM-401 and NM-402 were genotoxic in A549 cells. NM-401 and NM-402 are the two longest MWCNTs analyzed in this work, suggesting that length may be determinant for genotoxicity. No induction of micronuclei was observed in Beas-2B cell line and the different effect in both cell lines is explained in view of the size-distribution of MWCNTs in the cell culture medium, rather than cell's specificities.

2016-10-01Journal article

Restricted access

High throughput toxicity screening and intracellular detection of nanomaterials

Publication . Collins, A.R.; Annangi, B.; Rubio, L.; Marcos, R.; Dorn, M.; Merker, C.; Estrela-Lopis, I.; Cimpan, M.R.; Ibrahim, M.; Cimpan, E.; Ostermann, M.; Sauter, A.; Yamani, N.E.; Shaposhnikov, S.; Chevillard, S.; Paget, V.; Grall, R.; Delic, J.; de-Cerio, F.G.; Suarez-Merino, B.; Fessard, V.; Hogeveen, K.N.; Fjellsbø, L.M.; Pran, E.R.; Brzicova, T.; Topinka, J.; Silva, M.J.; Leite, P.E.; Ribeiro, A.R.; Granjeiro, J.M.; Grafström, R.; Prina-Mello, A.; Dusinska, M.

With the growing numbers of nanomaterials (NMs), there is a great demand for rapid and reliable ways of testing NM safety—preferably using in vitro approaches, to avoid the ethical dilemmas associated with animal research. Data are needed for developing intelligent testing strategies for risk assessment of NMs, based on grouping and read-across approaches. The adoption of high throughput screening (HTS) and high content analysis (HCA) for NM toxicity testing allows the testing of numerous materials at different concentrations and on different types of cells, reduces the effect of inter-experimental variation, and makes substantial savings in time and cost.

2016-06-07Journal article

Open access